SOFTWARE/HARDWARE
• 128 Programmable Presets with Labels
• Auto, Frame, and Random Scan
• Programmable Park
• Programmable  Manual  Limit Stops  (Pan)
• Programmable  Scan Limit Stops  (Pan)
• Patterns
• Proportional Pan/Tilt
• 8-Inch Integrated Enclosure with Pre-Assembled, IOP Camera
• Sun Shroud, Heater/Window Defroster, and Insulation All Standard
• 1 Auxiliary Output  (for IR)
• Integrated Window Wiper with Programmable Delay and Shut-Off

MECHANICAL
Pan Movement        360° Continuous pan rotation
Vertical Tilt             Unobstructed  +33° to –83°
Variable Pan/Tilt Speed
   Pan                    0.1° to 160°/sec variable-speed operation,
                            240°/sec Turbo
Tilt                       0.1° to 60°/sec variable-speed operation
Preset Speeds
Pan                       240°/sec
Tilt                        60°/sec
Camera Mounting Integrated camera sled assembly

GENERAL
Construction                         Die-cast, extruded and sheet aluminum;
                                         stainless steel hardware
Finish
                                         Gray polyester powder coat
Viewing Window                  0.23" (5.84 mm) thick, optically clear impact/
                                          scratch-resistant coated Lexan®
Operating Temperature          –50° to 122°F (–45° to 50°C) for sustained
                                          system operation or 140°F (60°C) absolute
                                          maximum. Within two hours after power-up,
                                          the entire unit can de-ice and be operational
                                          from a temperature of –13°F (–25°C).
Operating Environment           Will remain operational in 90 mph wind
                                           conditions; withstands 130 mph
Weight (without mount) Unit
Standard  without IR 5.8kg
Standard  with IR 6.5kg
Shipping
Standard with power 8.0kg
IR Standard with power 8.5kg
Package Size 41*43*22  cm

 

ELECTRICAL
Input Voltage 24 VAC, 50/60 Hz; Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system(IR turn on)
Heater and Defroster  Thermostatically controlled
Electrical Connections 2 power source connections made at mount location with wire splices and 1 ground wire splice;  1 BNC receptacle and 2 wire splices at mount location for Pelco D and Pelco P protocols;
2 wire splices for open collector auxiliary output
Aux 2 Open collector output with 2-second activation; connected relay must require no more than 32 VDC and 40 mA to energize relay coil; wire length between  Esprit and relay must be less than 100 ft (30 m)

Video Coaxial Cable
Max. Wiring Distances Cable Type* Maximum Distance
RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m)

Minimum cable requirements:
75-ohms impedance; all-copper center conductor; all copper braided shield with 95% braid coverage